• HyperX Fury Black 4GB DDR3 1600MHz (PC3-12800) CL10 DIMM Memory


  • SKU: D3-4G1600KHX10-FUBLK
  • EAN: 7.41E+11
  • Availability: 5+ In Stock
  1 people view today
  • Memory Capacity : 4GB
  • Memory type: DIMM
  • Warranty : Lifetime
  • $56.87

Product Details

Capacity4GB (1 x 4GB)
Series
Kingston HyperX Fury
Rank Single Rank 
CompliancePC3-12800
Memory TypeDDR3
Data Integrity CheckNon-ECC
Memory Speed1600MHz
CAS LatencyCL10
Pins240-pins
Package Weight0.0500 kg
WarrantyLifetime
 
HyperX HX316C10FB/4 is a 512M x 64-bit (4GB) DDR3-1600 CL10 SDRAM (Synchronous DRAM) 1Rx8 memory module, based on eight 512M x 8-bit DDR3 FBGA components. This module has been tested to run at DDR3-1600 at a low latency timing of 10-10-10 at 1.5V. Additional timing parameters are shown in the PnP Timing Parameters section below. 
 
Features
 
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential withstarting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write
  [either on the fly using A12 or MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB : Height 1.180” (30.00mm), single sided component
ManufacturerHyperX
ColorNo
BuyBack Product SKUNo
Supported Memory TypesDDR3-SDRAM
Memory Layout (Modules X Size)4GB (1 X 4GB)
Memory Clock Speed1600MHz To 1749MHz
Internal Memory (RAM)4GB
Internal Memory TypeDDR3-SDRAM
Memory PinsNo
CAS LatencyCL10
RefurbishedNo
ConditionBrand New

Write Your Own Review

You're reviewing: HyperX Fury Black 4GB DDR3 1600MHz (PC3-12800) CL10 DIMM Memory

Use spaces to separate tags. Use single quotes (') for phrases.

Product Questions

Have no questions.

Loading...