Kingston 4GB DDR3 1600MHz (PC3-12800) CL11 SODIMM Memory

£30.99
In stock
Only 5 left
SKU
KVR16LS11/4
    Add to Compare Add to Wish List
    Key Features

    Product Detail

    ValueRAM's 512M x 64-bit (4GB) DDR3L-1600 CL11 SDRAM (Synchronous DRAM), 1Rx8, low voltage, memory module, based on eight 512M  x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.35V or 1.5V. This
    204-pin SODIMM uses gold contact fingers.
    Capacity 4GB
    Memory Model  Kingston ValueRAM
    Rank  R1 Single Rank 
    Memory Type SODIMM
    Compliance PC3-12800
    Error Correction

    Non-ECC Unbuffered

    Memory Speed

    1600MHz

    CAS Latency

    CL11

    Warranty Lifetime
     
    Features
     
    • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
    • VDDQ = 1.5V (1.425V ~ 1.575V)
    • 800MHz fCK for 1600Mb/sec/pin
    • 8 independent internal bank
    • Programmable CAS Latency: 11, 10, 9, 8, 7, 6
    • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
    • 8-bit pre-fetch
    • Burst Length: 8 (Interleave without any limit, sequential withstarting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write
      [either on the fly using A12 or MRS]
    • Bi-directional Differential Data Strobe
    • Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
    • On Die Termination using ODT pin
    • Average Refresh Period 7.8us at lower than TCASE 85°C 3.9us at 85°C < TCASE < 95°C
    • Asynchronous Reset
    • PCB : Height 1.180” (30.00mm), double sided component
    More Information
    Refurbished No
    Condition Brand New
    Write Your Own Review
    You're reviewing:Kingston 4GB DDR3 1600MHz (PC3-12800) CL11 SODIMM Memory
    Back to Top

    Kingston 4GB DDR3 1600MHz (PC3-12800) CL11 SODIMM Memory

    £30.99